Avaya Wireless AP-3 - Manual (Page 337)

Other Network Settings
Avaya Wireless AP-3 User’s Guide A-51
Set the Multicast Rate (802.11b Only)
[Device Name]>set wif multrate <1,2,5.5,11 (Mbits/sec) >
NOTE:
The Distance Between APs must be set before the Multicast Rate.
Set Ethernet Speed and Transmission Mode
[Device Name]>set etherspeed (see below)>
[Device Name]>reboot 0
Ethernet Speed and
Transmission Mode
Value
10 Mbits/sec - half duplex 10halfduplex
10 Mbits/sec - full duplex 10fullduplex
10 Mbits/sec - auto duplex 10autoduplex
100 Mbits/sec - half duplex 100halfduplex
100 Mbits/sec - full duplex 100fullduplex
Auto Speed - half duplex autohalfduplex
Auto Speed - auto duplex autoautoduplex
(default)