Avaya Wireless AP-3 - Manual (Page 40)

Hardware Installation
Avaya Wireless AP-3 User’s Guide 2-9
4. Connect power to the unit from a DC injector device, such as the
Avaya Wireless 1-Port Active Ethernet DC Injector hub.
5. Wait for the LED indicators to turn green before proceeding.
Figure 2-3. Connect an Ethernet cable from an AE hub to the AP
6. Conduct a Site Survey to determine the best location for your
device. If you need assistance, contact your reseller for help.
7. Once you have chosen a final location for your unit, mount the wall
bracket and the processor module and place the cover onto the
unit as shown.