Avaya Wireless AP-3 - Manual (Page 400)

Parameter Tables
A-114 Avaya Wireless AP-3 User’s Guide
Other Parameters
IAPP Parameters
NOTE:
These parameters configure the Inter Access Point Protocol (IAPP)
for roaming. Leave these settings at their default value unless a
technical representative asks you to change them.
Name Type Values Access CLI Parameter
IAPP Group N/A R iapp
IAPP Status Integer enable (default)
disable RW iappstatus
Periodic Announce
Interval (seconds) Integer 80
120 (default)
160
200
RW iappannint
Announce
Response Time Integer 2 seconds R iappannresp
Handover Time-out Integer 410 ms
512 ms (default)
614 ms
717 ms
819 ms RW iapphandtout
Max. Handover
Retransmissions Integer 1 - 4 (default 4) RW iapphandretx
Send Announce
Request on Startup Integer enable (default)
disable RW iappannreqstart