Atec Agilent-J2300E - Manual (Page 86)

86
Pre-capture filtering:
By VPI-VCI (UNI or NNI), including/excluding idle/unassigned cells,
by PTI and/or CLP; up to three different VPI-VCI filters can be specified;
cells with bad HECs can also be filtered
Display (post-capture) filtering by:
VCC: VPI-VCI (UNI or NNI), errored headers (“HEC” errors)
IP source and/or destination address in PDUs conforming to RFC 1483,
RFC 1577 or LANE
Decode: same as for display decodes (below)
Display decodes include:
AAL-3/4, AAL-5, OAM, ILMI, RM
Q.2110 SSCOP (for UNI Sig. 3.1), Q.SAAL1 SSCOP (for UNI Sig. 3.0),
UNI Signalling (3.0, 3.1), SPANS, LANE (1.0 and 2.0), MPOA, PNNI,
Frame Relay network interworking (FRF.5),
MPEG2,
802.1d (Spanning Tree), 802.2, 802.3, Ethernet, 802.5,
ARP (inc. Inverse ARP), BGP (Keep Alive),
BOOTP, DNS, GSMP, ICMP, IFMP, IP, IPX, LLC/SNAP, NHRP, OSPF,
RIP, SAP, SNAP, SNMP, TCP, TFTP, Telnet, UDP
Other LAN decodes (including Agilent Advisor “Commentators”):
TCP/IP, Novell, IBM, AppleTalk, Xerox, Banyan, Oracle, Sybase, OSI,
DECNet
QoS measurements:
Test cell analysis for cell loss, misinsertion, CDV tolerance threshold
(note: test-cell generation does not conform to ITU-T O.191)
Outputs:
With single-mode optics plug-in module J3764A:
Two ports, 1310nm Class 1 single-mode laser
(multi-mode fiber compatible with 10 dB attenuator, sold separately)
Output levels:
Min. -15 dBm
Typ. -13 dBm
Max. -8 dBm
Clocking:
Recovered (loop) and Internal
Generation:
a single cell
from a script of multiple cells
from a previously captured cell trace
from imported files
send PING (ICMP Echo) - AAL-5 encapsulated RFC 1483 and
RFC 1577
QoS test cell generation (note: test-cell generation does not conform to
ITU-T O.191
ATM and WAN Interface
Specifications
(continued)