beautypg.com

Atec Agilent-J2300E User Manual

Page 3

background image

3

Key WAN Features
and Functionality

Key General Features
and Functionality

The Agilent Advisor provides the following powerful wide area network (WAN)

features and functions:

• WAN testing speeds from 50 b/s to 155 Mb/s

• Packet over SONET/SDH (PoS) analysis (IETF and Cisco)

• Built-in all major WAN interfaces into the instrument mainframe, including

V.10/V.11, V.24/V.28/RS-232C, V.35, V.36/RS-449/422/423/530, X.21

• V-Series interface support up to 8.192 Mb/s

• Interfaces, including ISDN Basic Rate Interfaces (BRI) S/T/U and Primary Rate

Interfaces (PRI), E1/T1 and E3/T3 Cells and Frames, Packet over SONET/SDH

HSSI, DDS 4-wire, and High Speed V-Series (V.35, RS-449 and X.21 to 8.192 Mb/s)

are available as slide-in modules

• Full-featured testing capability for all common WAN technologies, including

Frame Relay, PPP (Sync, Async), ISDN, X.25, HDLC, SMDS, SNA, Async,

Bisync, ATM DXI, and more

• Monitoring, data capturing, and decoding for upper and lower layer protocols

in real time

• Decodes LAN encapsulated protocols over WAN, including Voice over IP

decodes: H.323 series, IETF series (SIP, MGCP, SGCP, MEGACO), ITU-T T.38

• Real-time and post-processing User Assisted LAN over Frame Relay and HDLC,

PPP, ATM, DXI capture/display filtering and searching

• Find Error in capture file or buffer

• Comprehensive bit error ratio testing (BERT)

• Asynchronous and Bisynchronous monitor and traffic generation

• Frame Relay analysis Voice and Fax over Frame Relay (FRF.11) decodes

• Auto LMI detection and decoding for ANSI, ITU-T or original LMI

•Auto LAN encapsulation over Frame Relay detection for RFC 1490/2427,

Ethertype, FRF3.1, and RFC 2684/1483

• Service Level Agreement measurements according to FRF.13

• LMI Expert analysis

• CIR Measurements in all Frame Relay DLCIs

• Tests simultaneously on two WAN interfaces

• Tests simultaneously with other technologies (e.g. ATM, Ethernet)

• Signal Level measurement on T1, E1, E3, and T3

• SLIP Measurement

The Agilent Advisor provides the following additional features and functions:

•Other technologies covered include 10/100 Ethernet, Gigabit Ethernet, Token

Ring, FDDI, RTP QoS, VoIP and more

•LAN/WAN/ATM/VoIP under one handle

•Real-time counters and triggers, with logging and CSV export capabilities of

statistics to disk

•Line-status monitoring

•Commentators

•Absolute, Delta and Relative Time

•User bytes (skip bytes between layers)

•Enhanced decode view with HEX to detail correlation

•True multi-tasking capability with user friendly full 32 bit Microsoft Windows

®

user interface, so that monitoring, decoding, statistical analysis, and stimulus/

response tests can be executed simultaneously

•Context-sensitive on-line Help with measurement and troubleshooting guides,

acronym list, index and glossary

•Agilent Software Upgrade Subscription Service to keep users up-to-date on

the latest software enhancements

•Highly portable economical package featuring a rugged based PC with full

keyboard, large active color display and pointing device