Atec Agilent-J2300E - Manual (Page 85)

85
STM-4c/OC-12 (622.080 Mb/s) J3763A
General
This interface comprises an undercradle (J3763A) for the Agilent Advisor and a
single-mode optics plug-in module (J3764A) which can be used in multi-mode
situations with the use of a pair of 10 dB attenuators such as the J2928A.
Common to Inputs and Outputs:
Connectors: SC
Framing:
SDH: STM-4c
SONET: STS-12c
Frame Scrambling:
STM-1: ITU-T Rec.G.707
SONET: ANSI T1.105
Cell Scrambling conforms to I.432.1 (x 43 + 1) and may be turned on or off
Inputs:
With single-mode optics plug-in module J3764A:
Two ports (single-mode/multi-mode compatible)
Sensitivity:
Typ. –30 dBm
Min. –28 dBm
Loss of Signal (LOS) Detect Level: -39 dBm
Physical layer alarms and statistics (SDH / SONET):
Loss of Signal (LOS)
Loss of Frame (LOF)
Loss of Pointer (LOP)
Out of Frame (OOF)
B1, B2, B3 BIP error counts
BIP error indication
MS-REI/REI-L (Line FEBE) and counts
REI/REI-P (Path FEBE) and counts
MS-RDI/RDI-L (Line FERF)
MS-AIS/AIS-L
RDI/RDI-P (Yellow)
AIS/AIS-P
Signal label mismatch
Loss of Cell Delineation (LCD)
ATM Statistics:
Auto-discovery of up to 4,095 virtual channels (VC)
Instantaneous utilization in percent per VC
Peak percentage of total bandwidth per VC
Total cells received per VC
Header (“HEC”) errors
Capture buffer size: 64 Mbyte (approximately 1,000,000 cells)
Capture buffer timestamp resolution: 100ns
Capture rate: full line rate
ATM and WAN Interface
Specifications
(continued)