Smds (optional) atm dxi v5.1/v5.2 monitoring, Slip – Atec Agilent-J2300E User Manual

Page 52

The Advisor WAN provides run-time and post processing display of the

following decodes according to Bellcore TR-TSY-00772, 00773 and 00774

specifications:

Layer 1 PLCP

Layer 2 PDU

Layer 3 SMDS header

The following encapsulated protocols are decoded:

Frame Relay

X.25

HDLC

SNAP

ATM DXI monitoring on V.24/V.28/RS-232C, RS-449/V.36, V.35, T1, E1, E3, DS3,

HSSI

V5.1 and V5.2 are interface standards defined by the European

Telecommunication Standard Institute (ETSI) for interfaces between an Access

Network (AN) and the Local Exchange (LE). The Advisor WAN provides V5.1/

V5.2 monitoring capabilities.

Layer 2 LAPV

Layer 3

SMDS (Optional)

ATM DXI

V5.1/V5.2 Monitoring

The Serial Link Internet Protocol (SLIP) monitoring application allows
Serial Link IP analysis (see figure 24).

The following functionalites are supported

Capture filter

Display filter

Searching

Decodes

Statistics

Note: This functionality can only be used with the V-Series interfaces in the
mainframe, not with the High Speed V-Series interface J5457A. One of the
J229XD T1/E1 modules needs to be inserted when using this SLIP
application.

SLIP