Atec Agilent-J2300E - Manual (Page 6)

6
Dual Simultaneous Analysis
Note: The supported operating temperature range for Dual Simultaneous Analysis is 5 ° C to 30 ° C (41 ° F to 86 ° F).
The Agilent Advisor has the ability to test at two different interfaces and
technologies simultaneously, e.g. E1 Frame Relay and E3 ATM, DS3 Frame Relay
and 10/100 Mb/s Ethernet, ATM25 and OC-3 ATM, etc. This functionality allows
the user to test interworking in mixed technology environments (see the
Application Note 1346 for details on this kind of testing).
In order to perform dual simultaneous analysis, combinations of an Agilent
Advisor mainframe (J2300E or J3446E) and an undercradle (J3444A or J2900A)
is required, the mainframe and undercradle being each supported by an
application (LAN, WAN or ATM) running on the PC embedded in the
mainframe. Note that the applications do not have to be different so, for
example, a J2300E Agilent Advisor mainframe fitted with a J2900A High Speed
undercradle could each be fitted with the same type of ATM or WAN interface
and run simultaneously – e.g. two J3766A ATM25 interface modules.
The following table shows the combination of supported mainframes,
undercradles, interfaces and technologies.
Table 1 Hardware Support