Atec Agilent-J2300E - Manual (Page 50)

50
PRI – Primary Rate Simulation and Call Placement Specifications
Simulate:
TE (terminal equipment) or
NT (network termination)
Emulation:
LAP-D and partial Q.931
Transmit Clock:
Recovered from line or internal/equipment In
Receiver Mode:
Terminated or bridged
Line Codes:
AMI, B8ZS, HDB3
Framing Types:
ESF, D4, G.704 alternate framing with or without CRC-4, fractional;
channel (any multiple) 56 kb/s or 64 kb/s
Handset Support:
A-law and m-law
Receiver Mode:
Terminated or Bridged
BERT Channel:
Select any B channel or Fraction
TE Simulation Tests:
Place voice call
Place 56 kb/s data call
Place 64 kb/s data call
Place BERT call
Answer call - Answer a call and run end-to-end BERT
NT Simulation Tests:
Place voice call
Place 56 kb/s data call
Place 64 kb/s data call
Pre-written simulation tests support:
ETSI, NI-1, JT-Q.931, ITU-T, AT&T 5ESS, AT&T 4ESS, AT&T
NI-1, DMS-100, 1TR6, VN4, Siemens, and Australia
ISDN (continued)