Atec Agilent-J2300E - Manual (Page 28)

28
DLCI Statistics allows graphing the throughput of a particular PVC in the
network to visually determine traffic patterns as seen in figure 11, 12a and 12b.
With this application, the user can isolate the traffic of a specific PVC from the
rest of the link traffic.
DLCI Statistics
The Agilent Advisor captures all the Frame Relay frames on the link and
performs an automatic study of all the possible DLCIs (1024). This application
tracks the most relevant information of each of the virtual channels in the
network. A complete network condition analysis is performed on all the PVCs
present on the link.
The DLCI Measurement displays both the CPE and the Network statistics:
• Throughput in kb/s
• Frame Distribution
• Byte Distribution
The following values are provided for both the Line (Network) side and the
Equipment (User) side:
• Max. and inst. utilization (%)
• Max., inst. and avg. throughput in kb/s
•Total octets (bytes)
• Total frames/packets
• Short frames/packets
• DE
• FECN
•BECN
Figure 11: DLCI Statistics Table.
Frame Relay (continued)