Atec Agilent-J2300E - Manual (Page 82)

82
PoS statistics:
Average utilization in percent
Instantaneous utilization in percent
Maximum utilization in percent
Minimum utilization in percent
Average throughput (kbps)
Instantaneous throughput (kbps)
Maximum throughput (kbps)
Minimum throughput (kbps)
Total frames
Total octets
Abort Frames
Short frames
FCS errors
ATM QoS measurements (to ITU-T O.191)
ATM traffic contract conformance (policing) measurements
Capture buffer size: 64 Mbyte (approximately 1,000,000 cells)
Capture buffer timestamp resolution: 100 ns
Capture rate: Full line rate for ATM and PoS
Analyze bit error ratio (BER) patterns in the
physical layer frame payload or in the ATM cell payload:
1111, 1010, 1100, PRBS 2
15 - 1, PRBS 2 20 - 1, PRBS 2 23 - 1
Outputs:
Two ports
Output levels: 1.0 V ± 0.1V
Clocking:
Internal (± 20 ppm)
Recovered from input signal
Alarm Generation:
MS-RDI/RDI-L (Line FERF)
MS-AIS/AIS-L
RDI/RDI-P (Yellow)
AIS/AIS-P
Generate ATM Test Cell traffic (to ITU-T O.191) shaped to traffic contract
Generate from cell table
Generate bit error ratio (BER) patterns in the
physical layer frame payload or in the ATM cell payload:
1111, 1010, 1100, PRBS 2 15 - 1, PRBS 2 20 - 1, PRBS 2 23 - 1
Transmission of 4000 byte BER user pattern in WAN
Generation of PoS traffic not supported
ATM and WAN Interface
Specifications
(continued)