Atec Agilent-J2300E - Manual (Page 36)

36
Display Filters and Searching
Display filtering and searching lets the user search through collected data to
find specific IP addresses, values for protocol fields, or conversations on
specific bi-directional virtual connections (by DLCI). The display filters
provide the flexibility to select protocol attributes or specific protocols from
a checklist, and the power to filter on any bit, byte or characteristic, such as
protocol. For example, anyone can filter on Annex D without having to
know any of the protocol specifics.
Post-processing allows the user quickly zoom in on selected criteria, from the
traffic passing between specific devices to individual conversations. With
post-processing, the user can do the following:
• Search through the data by record or by time stamp
• Search for events or strings
• Filter on protocols
• Verify event-to-event timing
• Search and view protocol errors
• Print a range of cells or the entire buffer to printer or ASCII file
• Export data in CSV (comma separated variables) format
• Analyze statistics based on the buffered data
User Assisted LAN over Frame Relay Filtering
The User Assisted LAN over Frame Relay allows the user to perform LAN
filtering and searching on LAN nodes, Layer 3 protocols, and IP source and
destination addresses as depicted in figure 19.
Figure 18: Filters and Counters
Frame Relay (continued)