Atec Agilent-J2300E - Manual (Page 80)

80
Outputs:
Two ports, 1310nm Class 1 laser (multi-mode fiber compatible with 10 dB
attenuator, available separately as J2928A)
Output levels:
Min. -12 dBm
Max. -7 dBm
Clocking: Internal (± 20 ppm)
Alarm Generation:
MS-RDI/RDI-L (Line FERF)
MS-AIS/AIS-L
RDI/RDI-P (Yellow)
AIS/AIS-P
Generate ATM Test Cell traffic (to ITU-T O.191) shaped to traffic contract
Generate bit error ratio (BER) patterns in the physical layer frame payload or
in the ATM cell payload:
1111, 1010, 1100, PRBS 2 15 - 1, PRBS 2 20 - 1, PRBS 2 23 - 1
Generation of PoS traffic not supported
ATM and WAN Interface
Specifications
(continued)
PoS statistics:
Average utilization in percent
Instantaneous utilization in percent
Maximum utilization in percent
Minimum utilization in percent
Average throughput (kbps)
Instantaneous throughput (kbps)
Maximum throughput (kbps)
Minimum throughput (kbps)
Total frames
Total octets
Abort frames
Short frames
FCS errors
ATM QoS measurements (to ITU-T O.191):
ATM: traffic contract conformance (policing) measurements
Capture buffer size: 64 Mbyte (approximately 1,000,000 cells)
Capture buffer timestamp resolution: 100 ns
Capture rate: Full line rate for ATM and PoS
Analyze bit error ratio (BER) patterns in the
physical layer frame payload or in the ATM cell payload:
1111, 1010, 1100, PRBS 2 15 - 1, PRBS 2 20 - 1, PRBS 2 23 - 1