Franklin Fueling Systems TS 550 evo Fuel Management System Operators Guide - Manual (Page 6)

2
Certified Programmer/Service Person: Only a Franklin Fueling Systems certified programmer or service person is
allowed to access both the user interface keypad and areas internal to the Fuel Management System console.
Station Owner/Operator: The station owner or operator of the Fuel Management System console is only allowed to
access the user interface keypad. Access to areas internal to the console is strictly prohibited.
Approvals
All Fuel Management System models are UL and cUL listed 6L79 as Liquid Level Gauge / Leak Detection
Systems. Third party approved leak detection — Pd (probability of detection) = 99.2 % for 0.1 or 0.2 GPH leak
tests (0.1 = annual precision test, 0.2 is the monthly regulatory compliance test).
*The static tank test does not support Manifolded tanks.
**SCALD is 3rd party approved for ONLY two Manifolded tanks.
Related Documentation
The system installation and programming instructions are provided for your use in separate documents. Detailed
installation and testing instructions for each type of leak detection sensor are present in the relevant manual, and,
likewise, the installation, testing and programming of various upgrade kits and optional accessories are also contained in
separate manuals, addenda or in one of this document’s appendices.
TS-550 evo Series Fuel Management Systems Installation Guide (000-2170)
TS-550 evo Series Fuel Management Systems Programming Manual (000-2173)
Manuals can be found on-line at: http://www.franklinfueling.com/service/docs.asp