Franklin Fueling Systems TS 550 evo Fuel Management System Operators Guide - Manual (Page 16)

12
Utilities Screen
The Utilities Screen allows users and technicians to
change console configuration, setup, and preferences. It
also provides system diagnostic tools allowing technician
to test, troubleshoot and reboot the system.
System
View Module Status, About the Console, System
Identification, and Software Options.
Module Status
Displays each module installed along with the modules’
Slot, State, and Software Version.
About
Displays contact information for Franklin Fueling Systems
and a note regarding Open Source software.
Identification
Displays system identification information including:
System Serial Number, Ethernet Address, Controller Serial
Number, and the system creation date.
Software Options
Displays a list of optional software and wether they are
activated.
Setup
Provide access to all of the systems setup and
configuration options.
Configuration - (see below)
FAST
This function is only for use by installers / programmers.
Parameters
See the Programming manual for detail regarding system
setup and configuration.
Configuration Menu
Use the Configuration Menu to configure:
Passwords
Set the passwords for all access levels (Administrator Use
Only).
Network Parameters
Configure IP connection settings.
System Clock
Set the system date, Time, & Time Zone.
Sleep Mode
This will enable or disable the console blanking the display
after 5 minutes of inactivity.