Franklin Fueling Systems TS 550 evo Fuel Management System Operators Guide - Manual (Page 12)

8
Quick Jump Menu Selection Descriptions
Tank Inventory Summary Screen
The Tank Inventory Summary screen displays a
graphical representation of the product and water levels in
the tanks and indicates any alarm conditions. The Product
name and current Volume are also displayed for each tank.
An alarm condition on the tank is also indicated here, if
present. Pressing the print button while on this screen will
print an Inventory Report for all tanks.
To access the Tank Inventory Summary screen select
Tanks from the Quick Jump Menu (QJM).
Tank Inventory Detail Screen
The Tank Inventory detail screen will provide detailed
information on product volume, level, temperature and
ullage space available in a particular tank. The level and
volume of any water will also be displayed. The hash
marks on the graphic indicate the various programmed
high and low alarm limits. An alarm condition on the tank is
also indicated here, if present.
The Tank Inventory Detail screen also provides details
regarding the tanks Static Leak Test status, Autocalibration
status, and Delivery history using the four tabs at the top of
the left hand column. Pressing the print button while on the
page will print an Inventory Report for just this tank.
To access the Tank Inventory Detail Screen select a tank
from the Tank Inventory Summary screen.
Tank Controls feature can be accessed using the Control
Button on the Tank Inventory Detail Screen. This will allow
authorized users and technicians to start tank tests or
autocalibration.
Line Status Summary Screen
The Line Status Summary screen displays a graphical
representation of the line pressures in each line and will
indicate any alarm conditions. The Line name and current
pressure reading are also displayed for each line.
To access the Lines Status Summary screen select Lines
from the Quick Jump Menu (QJM).