Franklin Fueling Systems TS 550 evo Fuel Management System Operators Guide - Manual (Page 17)

13
Reboot System
This will perform a system software reboot and requires an
administrator password.
Reset options
Reset to factory defaults, erase archives, or reset setup.
Tools
Provides access to various system tools such as:
Annunciator, Test Relays, generate a Diagnostic Key,
access DIM Diagnostics, Test Relays, or Calibrate the
touch screen.
Test Annunciator
Tests the operation of the internal alarm.
Diagnostic Key
Enters Diagnostic Mode (Certified technician access only).
DIM Diagnostics
Allows technician to interface with the Internal DIM
settings.
Test Relays
View relay state and test operation (read screen caution
notice)!
Calibrate Touchscreen
Enables re-calibration of the touchscreen.
Save L-Factors
Allows technician to save line factors.
Secondary Containment Status Summary Screen
The Secondary Containment Status Summary screen
displays a graphical representation of the vacuum levels for
each Containment and will indicate any alarm conditions.
The Containment name and current vacuum reading are
also displayed for each line.
Access the Secondary Containment Status Summary
screen select Containments from the Quick Jump Menu
(QJM).
Secondary Containment Detail Screen
The Secondary Containment Detail screen will provide
detailed information on Secondary Containment Testing and
the Containment Status. From the Secondary Containment
Detail screen Containment Control can be accessed.