Extron Electronics IPL T SFI244 User Manual
Page 55
Example 5
This example demonstrates how to send out an IR string from the IPL T SFI244. The line
below shows an HTML hyperlink with an Extron IR command encoded into the URL.
The
?cmd=W1*1*15*0ir| is the syntax for the URL encoding of an IR command that
will be sent out of IR port #1. The
W and the | (pipe symbol) are used as the leading and
trailing delimiters for the instruction that tells the IPL T SFI244 which port number, .eir
file or function within the .eir file to send. The command also allows the programmer to
define whether the IR should be sent once or continuously until stopped. The IR Learner
program determines which IR function, such as play, is assigned to which number. Refer
to the IR Learner program for help with this feature.
Example 5
This example demonstrates how to send out an IR string from an IR file (1.eir) on IR
Port #1 from the IPL T SFI244. This IR driver must be loaded on the IPL T SFI244 in
order to send out the string.
Figure 49.
HTML Source Code Showing an IR String from the IPL T SFI244
Figure 50.
Browser View
IPL T SFI244 • Communication and Control
49