Extron Electronics IPL T SFI244 - Manual (Page 29)

The System Status page (see figure 22) is displayed, showing the current IP and port
settings of the unit.
Figure 22. System Status Screen
Establishing or changing system or port settings
The System Settings screen is used to initially configure or change configuration of the
IPL T SFI244 interface. You may be required to change system settings if your network
changes, or if port settings change as you add or change display devices or switchers.
To configure system or port settings:
1. Select the Configuration tab. The System Settings screen (see figure 23) is displayed.
Figure 23. System Settings Screen
2. Make changes to the IP settings or date/time settings, as necessary.
3. Click Submit to enter the changes or click Cancel to revert to the previous settings.
IPL T SFI244 • Communication and Control 23