Extron Electronics AVT 200HD User Guide - Manual (Page 89)

AVT 200HD Tuner • HTML Configuration and Control 83
Passwords Page
Access the Passwords page by clicking the Passwords link on the sidebar menu on the
System Settings page.
Figure 52. Passwords Page
Setting a password
The fields on the Passwords page are used to enter and verify administrator and user
passwords. Passwords are case-sensitive and are limited to 12 upper- and lowercase
alphanumeric characters.
1. Enter the new administrator password in the Administrator Password field.
2. In the Re-enter Admin Password field, enter the same password to confirm it.
3. If you want to assign a user password, enter it in the User Password and Re-enter
User Password fields.
NOTE: An administrator password must be created before a user password can be
assigned.
4. Click the Submit button to set the passwords.
Characters in the password fields are masked by four bullets (••••). If you do not want to
password-protect an access level, leave the
Password and the Re-enter Password fields
blank.
Removing passwords
To clear an existing password so that no password is required, delete the bullets in the
Password and Re-enter Password fields and enter a space in each field, then click the
Submit button at the bottom of the page.