Extron Electronics AVT 200HD User Guide - Manual (Page 79)

AVT 200HD Tuner • Remote Configuration and Control 73
7. In the Firmware Loader window, click Begin . The following indicators on the Firmware
Loader window show the progress of the update:
• The Transfer Time field shows the amounts of remaining and elapsed time for the
update.
• The Total Progress field displays a status bar with Uploading... above it.
• In the Devices section, the Progress column displays an incrementing percentage
and the Status column displays Uploading .
Figure 45. Firmware Update in Progress
When the upload is complete, the Remaining Time field shows 00.00.00 , the
Progress column shows 100% , and Completed is displayed above the progress bar and
in the Status field.
At this point, the AVT resets itself. The LCD screen on the unit displays REBOOTING
PLEASE WAIT... . When the reset is complete, the LCD screen returns to the default
cycle.
8. When the firmware upload and unit reset are complete, close the Firmware Loader
window. The AVT 200HD Configuration & Control Program main window is redisplayed.