Menus on the lcd screen, Menu system overview, Later in this section, for information on – Extron Electronics AVT 200HD User Guide User Manual
Page 22
AVT 200HD Tuner • Operation
16
Menus on the LCD Screen
The AVT 200HD menus that are displayed on the LCD screen enable you to configure and
operate the tuner from the front panel. The menu navigation buttons (Menu and Next) are
located to the right of the LCD window. Press these buttons to cycle through the available
menus, submenus, and options.
Menu System Overview
The menu system consists of five menus, some of which have submenus (see the
on the next page).
Using the menus
Access the different levels of menus using the Menu and Next buttons and the Adjustment
knobs as follows:
1.
To access the menu system, press the Menu button. The first menu name (
Channel
Setup
) is displayed on the LCD screen.
2.
Select a menu by repeatedly pressing the Menu button until the desired menu name is
displayed.
3.
When you see the menu that you want, press the Next button repeatedly to cycle
through its submenus.
4.
When the desired submenu is displayed, rotate the horizontal ([) or vertical ({)
Adjustment knob clockwise or counterclockwise to cycle through the submenu options.
If you want to return to a menu from within one of its submenus, press Menu.
5.
When the desired option is displayed, do one of the following to implement it:
•
Press Next to display another submenu.
•
Press Menu repeatedly until the
Press Next
to
Exit
screen appears, then press
Next to return to the default cycle.
•
Do nothing more, and wait until the LCD screen returns to the default cycle
(approximately 30 seconds).
Your selections are automatically saved.