Extron Electronics AVT 200HD User Guide - Manual (Page 101)

AVT 200HD Tuner • HTML Operation 95 AVT 200HD Tuner • Reference Information 95
Reference
Information
This section provides reference information on the AVT 200HD. The following topics are
covered:
• Specifications
• Part Numbers and Accessories
• Mounting the Tuner
• IP Addressing
• Frequency Tables
Specifications
RF video input
Number/signal type ........................ 1 radio frequency (RF)
Connector ...................................... 1 female F connector
Level .............................................. ATSC: -80 dBm to -5 dBm
Cable: -62 dBm to -32 dBm
Impedance ..................................... 75 ohms
Frequency range ............................. 54 MHz to 863 MHz
ATSC channels ............................... 2-69
Cable channels ............................... 1-135 (clear QAM channel)
Signal processing
Video ............................................. ATSC 8-VSB demodulation
64/256 QAM demodulation
MPEG2 main profile high level video decoding
Audio ............................................. 5.1 channel Class A Dolby ® Digital audio decoding
PCM audio decoding
Video output — analog
Number/signal type ........................ 1 RGBHV
1 component video
1 S-video
1 composite video
Connectors .................................... 5 female BNC
3 female BNC
1 female 4-pin mini DIN
1 female BNC
Nominal level ................................. 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels .............. 0 V to 1.0 Vp-p
Impedance ..................................... 75 ohms