YSI TruLab 1320P - Manual (Page 78)

Data storage TruLab pH/ISE 1320
78
ba76157e01 03/2014
10 Data storage
You can transmit measured values (datasets) to the data storage:

Manual data storage (see section 10.1 M ANUAL DATA STORAGE , page 78)
 Automatic storage at intervals (see section 10.2 A UTOMATIC DATA STORAGE
AT INTERVALS
, page 79)
With each data storage process, the current datasets of the sensors indicated
on the display are transmitted to the interface at the same time.
10.1 Manual data storage
You can transmit a measurement dataset to the data storage as follows. With
each data storage process, the current datasets of the sensors indicated on the
display are transmitted to the interface at the same time.
If the storage is full The following window appears if all 200 storage locations are occupied:
1. Press the key shortly.
The menu for manual data storage appears.
2. If necessary, change and confirm the ID number (1 ... 10000) with
<><> and
12.12.2012 11:24:16
pH 7.000 24.8 °C AR +++
ID number: 1
Continue
Manual data storage 4 von 200
12.12.2012
12:12
Back