YSI TruLab 1320P - Manual (Page 74)

Settings TruLab pH/ISE 1320
74
ba76157e01 03/2014
Man. temperature -25 ... +25 ... +130 °C Entry of the manually deter-
mined temperature. For
measurements without tem-
perature sensor only.
ISE setup /
AutoRead criterion low
medium
high Selection of the AutoRead
criteria (see section 8.1.1
M
EASURING THE ION CON
-
CENTRATION
, page 45).
ISE setup /
Ion type Ag, Br, Ca, Cd, Cl, CN,
Cu, F, I, K, Na, NO3,
Pb, S, NH3, NH4*,
CO2, ION Selection of the ion type to
be measured.
An ion that is not included in
the list can be measured
with the setting, ION.
* Measuring with the NH 500 electrode:
The NH4 setting is not suitable for the gas-sensitive
electrode NH 500.
Select the following settings:
Ion type "ION", Valency "-1".
ISE setup /
Unit mg/l
µmol/l
mg/kg
ppm
% Selection, with which unit
the measurement result and
calibration standards should
be displayed.
ISE setup /
Ion type / ION Valency
Molar mass Set the valence (Valency)
and molar weight (Molar
mass) for the ion.
ISE setup /
Density 0.001 ... 9.999 g/ml or
kg/l Adjustable density of the
test sample (only with Unit:
mg/kg, ppm, %)
Method Standard addition
Standard subtraction
Sample addition
Sample subtraction
Blank value addition Selection of the available
measuring methods.
Start method Start measurement with the
selected method.
Menu item Possible setting Description