YSI TruLab 1320P - Manual (Page 11)

TruLab pH/ISE 1320 Commissioning
ba76157e01 03/2014
11
3 Commissioning
3.1 Scope of delivery
 pH meter TruLab pH/ISE 1320
 4 batteries 1.5 V Mignon type AA
 Power pack
 USB cable (A plug on mini B plug)
 Stand
 Stand holder
 Comprehensive operating manual
 Short instructions
 CD-ROM with
– USB drivers
– detailed operating manual
– Software MultiLab Importer
3.2 Power supply
The TruLab pH/ISE 1320 is supplied with power in the following ways:
 Mains operation with the supplied power pack
 Battery operation (4 x alkaline manganese batteries, type AA)
 USB operation via a connected USB-B cable
3.3 Initial commissioning
Perform the following activities:

Insert the supplied batteries
 For mains operation: Connect the power pack
 If necessary, mount a stand
 Switch on the meter
(see section 5.2 S WITCHING ON THE METER , page 19)
 Set the date and time
(see section 5.4.6 E XAMPLE 2 ON NAVIGATION : S ETTING THE DATE AND TIME ,
page 25)