3 switching off, 4 navigation, 1 operating modes – YSI TruLab 1320P User Manual
Page 20: Switching off, Navigation, Operating modes
Operation
TruLab pH/ISE 1320
20
ba76157e01
03/2014
5.3
Switching off
Automatic switch-off
The instrument has an automatic switch-off function in order to save the
batteries (see section 9.3.1 S
, page 75). The automatic switchoff
switches off the measuring instrument if no key is pressed for an adjustable
period.
The automatic switchoff is not active
if the communication cable is connected
if the Automatic data storage function is active, or with automatic data trans-
mission
if the power pack is connected
Display illumination
The meter automatically switches off the display illumination if no key is
pressed for 30 seconds. The illumination is switched on with the next keystroke
again.
You can also generally switch the display illumination on or off (see section
9.3.1 S
5.4
Navigation
The principles of navigation in menus and dialogs are explained in the following
sections.
5.4.1 Operating modes
The meter has the following operating modes:
1.
Switch the meter off with
pH
6.949
25.0
°C
12.12.2012
12:12
USB output