YSI TruLab 1320P - Manual (Page 17)

TruLab pH/ISE 1320 Operation
ba76157e01 03/2014
17
5 Operation
5.1 General operating principles
5.1.1 Keypad
In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. ) generally indicates a short keystroke (under
2 sec) in this operating manual. A long keystroke (approx. 2 sec) is indicated
by the underscore behind the key symbol (e.g. ).
:
:
:
: Softkeys providing situation dependent functions, e.g.:
/[USB output]:
Outputs data to the USB interface
/[USB output]:
Configures the automatic data output to the USB inter-
face
: Switches the meter on or off
: Selects the measured parameter / Quits the settings
:
: Calls up the calibration procedure
Displays the calibration data
:
: Saves a measured value manually
Opens the menu for the automatic save function
:
: Displays the manually stored measured values
Displays the automatically stored measured values
<><>:
<__><__>:
Menu control, navigation
Increments, decrements values
Increments, decrements values continuously
:
: Opens the menu for measurement settings / confirms
entries
Opens the menu for system settings
Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
F1
F2
STO STO
RCL
AR AR