YSI TruLab 1320P - Manual (Page 67)

TruLab pH/ISE 1320 Settings
ba76157e01 03/2014
67
Calibration/
Serial number (sen-
sor)
- Entry of the series number of the
connected sensor.
The series number is output in the
calibration record.
 Change the contents of the high-
lighted position with <><>.
 Go to the next digit with /
[].
 After theseries number was
completely entered, confirm with
.
Calibration /Buffer YSI
ConCal
NIST/DIN
... Buffer sets to be used for pH cali-
bration (see section 6.2 C
ALIBRA
-
TION , page 31).
Calibration /One
point calibration Yes
No Quick calibration with 1 buffer
Calibration /Cali-
bration interval 1 ... 7 ... 999 d Calibration interval for the pH elec-
trode (in days).
The meter reminds you to calibrate
regularly by the flashing sensor
symbol in the measuring screen.
Calibration /Unit for
slope mV/pH
% Unit of the slope.
The % display refers to the Nernst
slope of -59.2 mV/pH (100 x deter-
mined slope/Nernst slope).
Man. temperature -25 ... +25 ...
+130 °C Entry of the manually determined
temperature. For measurements
without temperature sensor only.
Temperature unit °C
°F Temperature unit,
degrees Celsius or degrees Fahr-
enheit.
All temperature values are dis-
played with the selected unit.
Resolution pH 0.001
0.01
0.1 Resolution of the pH display
Menu item Possible set-
ting Description