9 settings, 1 measurement settings, 1 settings for ph measurements – YSI TruLab 1320P User Manual
Page 66: Settings, Measurement settings, Settings for ph measurements, Selected (see section 9.1.1 s, Ettings, Measurements, Section 9.1.1 s
Settings
TruLab pH/ISE 1320
66
ba76157e01
03/2014
9
Settings
9.1
Measurement settings
9.1.1 Settings for pH measurements
The settings for pH measurements are made in the menu for calibration and
measurement settings of the pH/ORP measurement. To open the settings, dis-
play the required measured parameter in the measured value display and
press the key. After completing the settings, switch to the
measured value display with
In the following table, only those settings are listed that concern the pH mea-
surement.
Default settings are printed in bold.
Menu item
Possible set-
ting
Description
Calibration /Cali-
bration record
-
Displays the calibration record of
the last calibration.
Calibration /
Calibration data
storage /Display
-
Displays the calibration record.
Further options:
Scroll through the calibration
records with <><>.
Output the displayed calibration
record to the interface with
Output all calibration records to
the interface with
output].
Quit the display with
[Back] or .
Switch directly to the measured
value display with
Calibration /
Calibration data
storage /
Output to USB
-
Outputs the calibration records to
the interface.