YSI TruLab 1320P - Manual (Page 23)

TruLab pH/ISE 1320 Operation
ba76157e01 03/2014
23
5.4.5 Example 1 on navigation: Setting the language
1. Press the key.
The measured value display appears.
The instrument is in the measuring mode.
2. Using
3. Select the System submenu with <><>.
The current selection is displayed with a frame.
4. Open the System submenu with
Calibration record
Calibration data storage
Serial number (sensor)
Buffer
: TEC
One point calibration : Yes
Calibration interval : 7 d
Unit for slope : mV/pH
i 2.00 4.01 7.00 10.01
pH
12.12.2012
12:12
Back
pH
6.949
25.0
°C
12.12.2012
12:12
USB output
System
Data storage
Storage & config
12.12.2012
12:12
Back