Spicer Driveline Components Catalog - End Yokes - Manual (Page 26)

END YOKES with SPLINED HOLES
J300P-4
R Q S End Yoke Assy. Slinger/Plug Spicer
Major Ground Length Centerline C'Bore Style (includes slinger) Part Part
Diameter Hub Dia. Thru Hole to End Depth Order When Listed Number Number
24
Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued  Part is available until supply is exhausted © Not sold separately
1480 SERIES SR: E-4.438 OTHERS: E-4.188, D-1.375 USE KIT 5-188X, 5-803X
USES U-BOLT ASSY NO.3-94-28X,STRAP ASSY. 3-70-38X
1.276-29 Involute Spline
1.276 1.875 1.500 3.500 — BS 3-4-13391-1X 34592 3-4-9531-1•
1.375-10 Spline
1.375 2.125 1.750 3.965 — BS 3-4-8961-1X• 231496 3-4-3231-1
1.375 2.125 2.000 3.859 — SR — — 3-4-13021
1.375 2.125 2.000 4.031 — UB — — 3-4-6701•
1.375 2.125 2.000 4.031 — BS — — 3-4-6701-1
1.500-10 Spline
1.500 1.810 2.000 4.031 — BS — — 3-4-13921-1
Coupling shaft yoke; Hub diameter not ground
1.500 1.810 2.000 4.031 — BS 3-4-7391-1X• 231004 3-4-6901-1
Coupling shaft yoke
1.500 1.810 2.000 4.031 — BS — — 3-4-6901-2•
Coupling shaft yoke. Attaching hardware by OEM
1.500 1.938 2.000 4.031 — BS 3-4-4421-1X 230124 3-4-3091-1
Coupling shaft yoke
1.500 2.062 2.000 4.031 — UB 3-4-3331X 230207 3-4-3081•
3-4-3331X was replaced by 3-4-3081-1; Coupling shaft yoke; Hub diameter not ground
1.500 2.062 2.000 4.031 — BS — 230207 3-4-3081-1
Coupling shaft yoke; Hub diameter not ground
1.500 2.125 2.000 4.219 .250 BS — — 3-4-3111-1
1.500 2.125 2.120 3.660 — BS — — 3-4-7781•
Flanged end yoke.
1.500 2.125 2.188 4.250 — UB 3-4-6261X• 230895 3-4-6251•
1.500 2.250 2.188 4.200 — BS 3-4-6221-1X 230895 3-4-3781-1
1.500 2.250 2.188 4.406 — BS — — 3-4-3241-1•
1.500 2.500 2.000 4.031 — BS — — 3-4-3691-1
1.506-23 Involute Spline
1.506 2.375 1.403 3.500 .240 BS — — 3-4-14031-1
1.506 2.375 1.406 3.500 .240 BS 3-4-11511-1X© 231982 3-4-11501-1
Counterbore at hub end.
1.525-35 Involute Spline
1.525 2.125 2.000 4.031 — BS — — 3-4-6691-1
1.525 2.500 1.938 5.750 — UB — — 3-4-7161•
Flanged end yoke.
1.533-17 Involute Spline
1.533 2.120 1.950 4.000 — BS — — 3-4-13791-1•