Spicer Gear & Pinion and Wheel Diff Case Kits Released for D_R170, D_R190 Models - Manual

Spicer
®
Drive Axles
ABIB-0507
Information Bulletin
Bulletin Type: Parts Information
Topic: Gear & Pinion and Wheel Diff Case Kits Released for D/R170, D/R190 Models
Affected Models: All D/R170, D/R190
The initial D/R170 and D/R190 series parts IPL (AXIP-0057) was released in late March 2005. At that time the service
gear/pinion kits along with the wheel differential case kits were not released. This bulletin is being issued to show those
particular kit part numbers until the original IPL is updated in late May.
In order to properly service or re-
ratio any D/R170 and/or D/R190
models, it requires the use of a
“Wheel Differential Bearing
Adjustment Tool” designed
specifically for these models.
The tool kit
Spicer P/N 513061
has been available thru service
parts and is shown at the right.
To properly install pinion seals
the “Seal Driver” tool kit,
Spicer
P/N 513349 is also available.
Your maintenance shop or
dealership should get these
popular tools in stock to properly
service these axles.
Spicer Wheel Diff
Bearing
Adjustment Tool
Kit: 513061
Spicer Pinion Seal
Driver Kit: 513349
NOTE: At this time the “BEARING KITS”
have not been released for these
models. Each individual bearing is
released and is identified in the current
IPL.
1