Figure 3, Schematic drawing of the filter housing cover – M&C TechGroup SP2000-H320_S2 Operator's manual User Manual

Page 13

Gas sampling and gas conditioning technology

2-1.1.4-ME

12.1 DISMOUNTING THE FILTER HOUSING COVER AND CHECKING THE FILTE-

RELEMENT

For this purpose, the filter housing cover must be dismounted as follows:

Figure 3 Schematic drawing of the filter housing cover



Remove the protection cover;



Turn the locking handle A for about one rotation to the left so that the lid is moved upwards;



Put the handle C into position E;



Swing the clamp clip B to the left (into direction G);



Pull the filter housing lid out using the locking handle A.