M&C TechGroup PAS Series Data sheet - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
14.7
Embracing Challenge
ƒ ƒ
Compact design
ƒ ƒ
Electronically controlled heating
ƒ ƒ
Digital temperature display
ƒ ƒ
Twofold safety temperature limiter
ƒ ƒ
Mounting of customized components
ƒ ƒ
Easy-to-service fitting of customized
components on a mounting plate
ƒ ƒ
Individual designs possible
ƒ ƒ
Bushings for sample pipes
Special Features
Heated, protective housing
Series PAS
enclosing customized components for
sample conditioning system
PAS
Application
Heated M&C sample conditioning systems are
used where increased and constant operating
temperatures are necessary for the analysis of
gases or liquids.
The large M&C product range of heatable
components, in connection with the heated
PAS-... protective housing, allows you to solve
problems specific to your applications.
Description
The conditioning components are housed
in the protective cabinet (wall mount-
ing) made of stainless steel, which is heat
insulated on all sides. The front door with
its single-knob lock enables easy access
to the accommodated components.
An observation window made of triple safety
glass is available as an option.
The heating of the cabinet is selectable within
the range of +20 to +200 °C. An exact, elec-
tronic control unit keeps the temperature
constant at ±1 °C. The temperature is dis-
played digitally. Two monitoring devices (tem-
perature selection control and temperature
limiter), which are fitted additionally, ensure
safe operation. In order to distribute the tem-
perature, a ventilator is fitted additionally into
models of size PAS-400 and above.
Depending on individual requirements the
following components can be installed:
•
Filters
• Solenoid valves
• Valves, manually or pneumatically oper-
ated
• Ball valves, manually or pneumatically
operated
• Flowmeters with a needle valve and a
monostable flow control
• Pumps (pump head inside heated part,
motor outside)
• Customized parts
Suitable bushings into the heated interior are
provided for the heated sample lines.
Designs with European standard explosion-
proof heating up to 120 °C operating temper-
ature or with steam heating as well as larger
cabinets are available on request.
Technical specifications and illustrations are without
obligation, subject to modifications. 09.96/01.07