M&C TechGroup ADS-So Data sheet - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
6.12
Embracing Challenge
ƒ ƒ
Save condensate removal and sepera-
tion
ƒ ƒ
Optical function control
ƒ ƒ
Different materials possible
ƒ ƒ
Simple and immediate cleaning
Special Features
Automatic liquid drainer
Version AD-P; AD-T; AD-So
Separator
including automatic liquid drainer
Version ADS-P; ADS-T; ADS-So
AD-T
Application
In gas sample conditioning systems and
especially in gas coolers, the M&C-automatic
liquid drainers AD-.. are used for continuous
draining of condensate.
The ADS-.. drainer has a modified upper part
with additional seperating function in order
to seperate and drain condensate from wet
gas sample flow.
The drainer only works in over-pressure sys-
tems.
Description
The AD-.. and ADS-.. drainer work by the
buoyancy principal.
In the unscrewable lower part, a buoyant
float close with its needle the valve seat as
long as its weight will be neutralized from the
bouyancy of the condensate level. Then the
float lifts up, opens the valve seat, condensate
drains off till the condensate level will be so
low, that buoyancy is lower than float weight.
The 3 different drainer versions differ in
the material. Type AD-P, AD-T, ADS-P and
ADS-T have got a float housing made of glass,
type AD-So and ADS-So have got a complete
stainless-steel housing.
Cleaning is very simple and immediatly done
because all parts are remowable. With type
AD-P, AD-T, ADS-P and ADS-T, draining func-
tion is visable from outside through the glass
housing.
Technical specifications and illustrations are without
obligation, subject to modifications. 04.95/06.06