M&C TechGroup PSP4000-H _C _T Data sheet - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
2.18
Embracing Challenge
ƒ ƒ
Light, easy to handle and compact
construction
ƒ ƒ
Electrically heated – adjustable from 100
to 180 °C
ƒ ƒ
With integrated micro-filter
ƒ ƒ
Variable probe tube- and connection
technique
ƒ ƒ
Integrated temperature measurement
ƒ ƒ
Sample extraction also with heated
sample probe tube
Special Features
Portable Gas Sample Probe
PSP4000-H /C /T
PSP4000-H
Application
Previously, gas sample probes designed for
stationary use had to be used for inspection
measurements carried out at different loca-
tions. The weight and bulkiness of such
units often caused problems for technicians
engaged in mobile measurements.
Now the light, handy and heated gas-sample
probe PSP4000-H has been developed as
a logical complement to the portable M&C
sample gas conditionig systems. Despite its
compact design, the unit guarantees a full
range of functions. To avoid cooling and
condensation of sample gas in the extrac-
tion area, a heated sample probe tube
SP34-H.. (see data sheet 2-2.2) is available.
Description
The portable gas sample probe PSP4000-H...
is electrically heated. Temperature controlling
is achieved by an integrated capillary sensor-
thermostat, adjustable from 100 to 180 °C. A
signal lamp is extinguished on reaching the
operating temperature and flashes in the
cycle of temperature regulation. A carrying
handle and a chain for in situ attachment
are mounted on the heat-isolated housing.
The integrated micro-filter element with
a fineness degree of 2 µm reliably retains
solid impurities and can be changed eas-
ily. For heavy-oil firing measurements,
a stainless-steel filter cartridge /FW for filter-
pads is optionally available.
The wide and versatile range of sampling
probes with diameters from 6 to 12 mm ø,
adapters and thread fittings allows adaptation
to the most varied circumstances.
At the version PSP4000-H/C calibration gas
injection into the probe is possible without
dismounting the probe.
Simultaniously temperature measurement
during sample extraction is also available for
version PSP4000-H/C/T.
In conjunction with the gas sample
probe PSP4000-H..., a specially designed
heated sample line PSP4M4/6 with inter-
changeable PTFE hosing or PSP-W4M4/6
with a smaller outside diameter is supplied.
The probe’s electrical power is then fed
to the probe via the feed line integrated
within the sample line. An aluminium-
composite case is optionally available
for the safe transport of the probe and up to 5
meters of type PSP4M4/6 respectively 8 m of
type PSP-W4M4/6 heated sample line.
Technical specifications and illustrations are without
obligation, subject to modifications. 09.96/06.06