EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual - Manual (Page 68)

EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
Issue 10.01.I
61
Note
This adjustment is done during the record process. A new Lipsync value
will apply for the next recorded pictures only.
3.12.3 A
UDIO
M
ETERS ON
OSD
Possible values: Yes (default) / No
This parameter enables/disables the display of audio meters at the bottom of each
output monitor.
3.12.4 A
UDIO
M
ETERS
A
DJ
.(
D
B)
Possible range: -12 to +12 by 2 dB steps. Default: 0 dB
This parameter allows adjusting the sensitivity of audio meters on the OSD of the
output monitors. A positive value means that the meters will be more sensitive.
3.12.5 A
UX
T
RACK
O
UTPUT
Possible values: Prv / Prv&7-8/15-16 / PGM
This parameter defines to which audio outputs the Aux. Track of the playlist will
be played out of.
Value Meaning
PRV (default) The Aux. Track will use the audio outputs normally assigned to
the PRV channel. If no PRV channel is available, the Aux
Track will not be assigned to any audio output.
PRV&7-8/15-16 The Aux. Track will use the audio outputs normally assigned to
the PRV channel if there is one, plus all the audio outputs
from 7-8/15-16 that have not yet been assigned to another
channel. Use this option if you need an aux track without PRV
channel available.
PGM The Aux. Track will use the audio outputs normally assigned to
the PGM channel.