Deleting a keyword file from the setup screen, Date format, Dft xfile – EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual User Manual
Page 15: Reset archive status, 6 record trains, Continous loop rec, Resync to tc ref
Issue 10.01.I
EVS
Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
8
D
ELETING A
K
EYWORD
F
ILE
F
ROM THE
S
ETUP
S
CREEN
Move the cursor to the Keywords File parameter using the
keywords file from disk, or not.
D
ATE
F
ORMAT
(dd/mm/yy)
This is the date format used for the dates in searches or in clip information
display. This parameter is read-only and provided for information purpose.
D
FT
XF
ILE
Value: XFile name and network number. Default: -------- # --
This setting defines the XFile where clips must be sent to when using the
ARCHIVE function from the EVS Remote Panel or VGA screens.
R
ESET
A
RCHIVE
S
TATUS
:
Pressing F6 will reset the archive status of all clips present on the system. A
confirmation is required. Refer to the description of the Archive function for
details.
2.2.6 R
ECORD
T
RAINS
C
ONTINOUS LOOP REC
This setting is read-only in the setup configuration window. It corresponds to the
value assigned to the Loop Rec setting for the related configuration in the
AVCFG.
R
ESYNC TO
TC
REF
You can also define this setting on page 2.1 of the setup menu on the Remote
Panel. You will find a description of this setting in the Multicam user manual.