EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual - Manual (Page 24)

EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
Issue 10.01.I
17
2.4 SDTI NETWORK PRIORITIES (PAGE 3)
On the third page of the Setup Configuration module (SHIFT-F2), it is possible to
define a higher priority for a player channel of the local server whenever they play
network clips/trains. This higher priority will only apply in play, not in shuttle
mode.
In the Setup menu, go to the third page (with the PgUp, PgDown keys) and select
which player channel should get a higher priority on the SDTI network.
Note
Using this command will not prevent a freeze on the SDTI network if the
network is completely stalled. It is always worth checking the network
status and defining clear network usage rules if you wish to play footage
across the network.
2.5 SMPTE 334M PACKETS MANAGEMENT
(PAGE 3)
From Multicam 8.03 onwards, ancillary data packet in the vertical ancillary data
space in HD and SD signals are supported, as defined in the SMPTE standards
334M, 291M (type 2 ANC packet).