EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual - Manual (Page 44)

EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
Issue 10.01.I
37
2.12.2 S
ETTINGS
As usual in the SHIFT-F2 screens, you move from one field to the over with the
key and you change the value of a field by means of the arrow keys.
D
ISPLAY
S
ETTINGS
Multiviewer Composition
The number of recorder or player channels to be displayed and the multiviewer
composition are defined in the field below:
The selected composition is shown on the schema on the right. The following
compositions are possible:
Value Composition
4 (2+2) 2 split images at the top and 2 at the bottom.
This is the default composition for XT[2] 4U.
6 (4+2) 4 small split images at the top and 2 large split images at the bottom
of the screen.
This is impossible to display the same source in small and large
size. If the user has already set a small image at the top and tries to
set the same in a large size, the small one is automatically replaced
by ‘None’.
This is the default composition for XT[2] 6U in channel
configurations 4IN-2OUT or 4OUT-2IN.
6 (3+3) 3 split images at the top and 3 at the bottom.
This is the default composition for XT[2] 6U in other channel
configurations.