EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual - Manual (Page 56)

EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
Issue 10.01.I
49
Record Trains p.2.3
[F1]Internal Loop Mode : Video+Audio
[F2]Make Clip rem. Trains : Ctrled Cams
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.8.13 I
NTERNAL
L
OOP
M
ODE
Possible values: Video + Audio (default) / Video only
This parameter defines which components of PGM1 output must be recorded back
into the server when the Loop mode is engaged.
• Video + Audio: Both video and audio signals of PGM1 are recorded back into
CAM A input.
• Video only: Only the video signal of PGM1 is recorded back into CAM A input.
This allows the operator to continue the record of live audio tracks during the
Loop process. This can be useful to add music, voice or live sound to an edit
for example.
Note
In audio embedded, the audio is always looped, whether the loop mode
is set to video + audio or video only.
3.8.14 M
AKE
C
LIP
R
EM
. T
RAINS
Possible values: Ctrled Cams (default) / All cams
This parameter allows clipping all cameras of a remote server if at least one
record train of that server is controlled.