EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual - Manual (Page 10)

EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
Issue 10.01.I
3
Setup page and section
name
Content
Page 4
See section 2.6 ‘GPI Settings
(Page 4), on page 20
It includes the settings on the GPIs IN and OUT
Page 5
See section 2.7 ‘RS422
Protocol Settings (Page 5)’,
on page 25
It includes settings on the VarID used with the
VDCP protocol.
Page 6
See section 2.8 ‘HCTX
Gigabit Connection Settings
(Page 6)’, on page 28 and
2.9 ‘LAN Connection Settings
(Page 6)’, on page 29
It includes detailed settings on:
the HCTX gigabit connection
the MTPC board connection
Page 7
See section 2.10 ‘Sony
BVW75 Settings (Page 7)’, on
page 31
It includes the settings used with the Sony BVW
protocol.
Page 8/9
See section 2.11 ‘EditRec
Settings (Page 8/9)’, on page
32
It includes the settings used with the EditRec
application.
Page 10
See section 2.12 ‘Multiviewer
Settings (Page 10)’, on page
36
It includes the settings for the connection of an
external multiviewer.
2.1.2 H
OW TO
A
CCESS THE
S
ETUP
C
ONFIGURATION
The Setup Configuration module is available by pressing simultaneously SHIFT-F2
on the keyboard with CAPS LOCK disabled. The Setup Configuration is not
accessible if CAPS LOCK is ON.
2.1.3 H
OW TO
M
OVE
I
NSIDE THE
S
ETUP
C
ONFIGURATION
• Use / SHIFT- to move from one parameter to the next/previous,
and the ←/→ arrow keys to change the value of a parameter.
• Use Page Up / Page Down to access the other configuration screens.