EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual - Manual (Page 43)

Issue 10.01.I EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
36
A
UDIO
S
ETTINGS
Setting Name Description
Edit Audio Fade Audio effect to be applied to the clip boundaries and
included in the clip material.
Edit Undo Cancels the last EditRec action. You can undo the last 9
actions.
2.12 MULTIVIEWER SETTINGS (PAGE 10)
The Page 10 of the Setup Configuration module makes it possible to specify the
settings for a multiviewer connected to the server.
2.12.1 I
NTRODUCTION
When an optional multiviewer board is installed on the server, you can monitor
the server channels on a multiviewer.
The server is connected to the display device via one of the dedicated connectors
on the server backplane:
• HD SDI connector
• SD SDI connector
• DB15 configurable connector.
When the multiviewer board is installed, Multicam automatically detects it. This
means the multiviewer feature is directly available and the user can specify the
multiviewer settings. Otherwise, the message !Not Detected! is displayed
on the first line of Page 10.