EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual - Manual (Page 59)

Issue 10.01.I EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
52
3.9.5 C
ALL
C
HANNEL
VGA
Possible values: Disable (default) / Enable
This parameter disables or enables the Call Channel function on the VGA Clip
screen. This function allows the operator to select on which PGM channel the
clips called from the keyboard/tablet and VGA should be loaded.
3.9.6 C
LIP
E
DIT BY
N
ETWORK
Possible values: Disable (default) / Enable
If this function is enabled, other users on the network can trim, rename, delete,
etc. your clips, or modify the keywords and ranking assigned to your clips. If
disabled, only the local operators can modify or delete clips on the server and
edit their metadata.
Clips p.3.2
[F1]Keywords file : Football [F8]Delete
[F2]Keyword Mode : List
[F3]PUSH Machine 1 : Peter #04
[F4]PUSH Machine 2 : Paul #05
[F5]PUSH Mode : Short
[F6]PUSH Receive Pg : 1 2 3 4
5 6 7 8 9 0
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.9.7 K
EYWORDS
F
ILE
Possible values: -------- (default), SERVER, or the name of a keywords file
present on the server.
This parameter specifies the keywords file to use to assign keywords to clips or to
search the clips database:
Value Meaning
-------- No keywords file is selected, and the keyword assignment and
related search functions are not available.
SERVER The keywords file sent by the active network server to all systems
on the network will be used.
Keyword
file name Other file names will appear if keywords files (files with a .KWD
extension) have been loaded in the C:\LSMCE\DATA\KWD directory
of the system. Keyword files can be imported using the
Import/Export Setup Files function of the Maintenance menu of
the EVS Menu (refer to the XT Tech Ref Software manual for
details). The F8 key allows the operator to delete the selected file
(confirmation required). Details about the keywords file format and
keywords-related functions are available in the ‘Keyword
Management’ section in the Multicam operational manual.