15 grab image, 16 browse button: browse/sort-tc, 17 reset archive status – EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual User Manual
Page 62: Owse/sort-tc, 15 g, 16 b, 17 r

EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
Issue 10.01.I
55
3.9.15 G
RAB
I
MAGE
Possible values: Disable (default) / Enable
When the function is enabled and a default XFile has been assigned, the grab
function is coupled with the Mark key on the Remote. Each time the Mark key is
used, a cue point is marked and a command is sent to the XFile to save that
image. The grab can also be activated on the keyboard with the combination
CTRL + G.
3.9.16 B
ROWSE
B
UTTON
:
B
ROWSE
/S
ORT
-TC
Possible values: Browse (default), Sort-TC
This allows the user to convert the function of the BROWSE button:
•
In the default BROWSE mode, it will activate the Play-list Browse directly.
•
If the value is changed to SORT-TC, the system will perform a Sort TC directly.
The system will not prompt the user with a select menu, and it will use the
current TC on the channel to search with the last selected criteria.
If the user wants to perform a search with different criteria (Search Net or Local,
StartDate, EndDate, CAM/CLIP, etc… ), the user should use the normal Sort-TC
selection in the upper menu.
3.9.17 R
ESET
A
RCHIVE
S
TATUS
:
Pressing F6 will reset the archive status of all clips present on the system. A
confirmation is required. Refer to the description of the Archive function for
details.