EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual - Manual (Page 67)

Issue 10.01.I EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
60
• Conditional: This loads t he selected playlist on the selected PGM only if only
1 channel is active when entering the PLST EDIT mode. Allows loading and
playing multiple playlists using a single Remote Panel.
3.11.12 P
LAYLIST
A
UTO
F
ILL
Possible values: All Cam (default) / Prim+Sec / Primary / Secondary / Cam A /
Cam B / Cam C / Cam D / Cam E / Cam F
This parameter selects which camera angles will be used when using the Playlist
Auto Fill function from the main menu of the remote.
3.12 AUDIO SETTINGS
Audio p.5.1
[F1]Audio slow motion : No
[F2]Lipsync value(ms) : 0
[F3]Audio meters on OSD : Yes
[F4]Audio meters adj.(db): 0
[F5]Aux track output : Prv
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.12.1 A
UDIO
S
LOW
M
OTION
Possible values: No (default) / Yes
Playback or mute the audio track when playing off-speed (speed different than
100%).
3.12.2 L
IPSYNC
V
ALUE
(
MS
)
Range for PAL: From -41,458 ms to 14,708 ms О 848 а 3544 (samples)
0 ms Î 2838
Range for NTSC: from -34,625 to 12,125 ms О 688 а 2932 (samples)
0 ms Î 2350
The Lipsync parameter is the delay (in ms) between video and audio signals. A
positive value means video is ahead of audio. A negative value means audio
ahead of video.
This parameter is also available from the Channel Parameters option of the EVS
Maintenance menu. Changing the Lipsync value in the Setup menu will update it
in the EVS menu and vice versa.