EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual - Manual (Page 27)

Issue 10.01.I EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
20
2.6 GPI SETTINGS (PAGE 4)
On the fourth page of the Setup Configuration module (SHIFT-F2), it is possible to
define GPI settings:
2.6.1 GPI T
YPES
Three types of GPIs are available to be used on the servers:
• Relay GPIs, which are always GPIs OUT, numbered from 1 to 4.
• OPTO GPIs, which are always GPIs IN, numbered from 1 to 4.
• TTL GPIs, which are switchable from GPIs IN to GPIs OUT or vice versa.
By default, they are GPIs IN. If TTL GPIs are already assigned when you switch
their type, a warning message will be displayed.