EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual - Manual (Page 13)

Issue 10.01.I EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
6
A
UDIO
M
ETERS ON
OSD
Possible values: Yes (default) / No
This parameter enables/disables the display of audio meters at the bottom of each
output monitor.
A
UDIO
M
ETERS
A
DJ
.(
D
B)
Possible range: -12 to +12 by 2 dB steps. Default: 0 dB
This parameter allows adjusting the sensitivity of audio meters on the OSD of the
output monitors. A positive value means that the meters will be more sensitive.
2.2.4 N
ETWORK
S
ETTINGS
You can also define the Clip edit by network setting on page 3.1, F6 of the setup
menu on the Remote Panel. You will find a description of these settings in the
Multicam user manual.
C
LIP
E
DIT BY
N
ETWORK
Possible values: Disable (default) / Enable
If this function is enabled, other users on the network can trim, rename, delete,
etc. your clips, or modify the keywords and ranking assigned to your clips. If
disabled, only the local operators can modify or delete clips on the server and
edit their metadata.
2.2.5 C
LIP
M
ANAGEMENT
S
ETTINGS
You can also define most of the Clip management settings on pages 3.1 to 3.3 of
the setup menu on the Remote Panel. You will find a description of these settings
in the Multicam user manual.
A
UTO
N
AME
C
LIPS
Possible values: Disabled (default) / TC IN / CAM Name / ID Louth / VarID
If this function is enabled, the value of the selected field will automatically be
used to name the clip upon creation.