EVS MulticamLSM Version 10.01 - October 2009 Configuration Manual - Manual (Page 61)

Issue 10.01.I EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
54
1. In the 2 n d page of Clip parameters, press the F5 key to edit the PUSH
Receive Page parameter.
2. Press the F_ key corresponding to the page number you want to
select/unselect as PUSH Receive Page.
The selected pages will be highlighted on the LCD and the corresponding
F_ keys light red. F_ keys of unselected pages light green.
3. Press ENTER to validate your selection.
Clips p.3.3
[F1]PLST Receive Pg : 1 2 3 4 5 6 7 8 9
0
[F2]Protocol receive Page : 06
[F3]Default XFile : XFile #31
[F4]Grab image : Disable
[F5]Browse button : Browse
[F6]Reset Archive Status
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.9.12 PLST R
ECEIVE
P
AGE
Possible values: Select one or more clip pages from 1 to 10. Default: Page 10
This function allows the operator to automatically create a local copy of all
network clips when copying a local or network playlist. In this setting, you need to
select the page(s) of your machine where clips received when using the
PLST+CLIPS copy function must be stored. Refer to the description of the Playlist
copy function for details. Clip pages can be assigned simultaneously as PUSH
and PLST Receive Pages.
3.9.13 P
ROTOCOL
R
ECEIVE
P
AGE
Default: Protocol Receive page 6
This setting defines in which page the clips created by protocol are stored. When
a page is full, clips are stored on the next page.
Only clips created on this page (and the other protocol pages if the first page is
full) are visible for protocols.
3.9.14 D
EFAULT
XF
ILE
Value: XFile name and network number. Default: -------- # --
This setting defines the XFile where clips must be sent to when using the
ARCHIVE function from the EVS Remote Panel or VGA screens.